Description
ACRYLIC TILE ADHESIVE
New synthesis product based on white cement and synthetic resins, ideal for bonding all kinds of ceramic tiles on cement floors and plastered walls (such as bathrooms etc.). Professional product, shows excellent workability, adhesion, moisture resistance and early mechanical strength. If strengthened improver emulsion «GLORIA DMG» is also used for pasting new tiles onto old or worn tiles, is prefered. The «GLORIA ROYAL» is a product that guarantees perfect placement in any medium. Classified C2T in accordance to European standard EN 12004.
INSTALLATION PROCEDURE:
· All the walls and floor supports are suitable for use as long they are, flat, compact, durable and purified.
· Stir quantity of «GLORIA ROYAL» with clean water in basin or bucket and homogenize with an electric mixer to a paste created not showing lumps or insolubles. The mixing time is usually 3-4 minutes. Each 25kilo sack requires 6-6,5 lt. water. Inside the container the mixture preparation stays plastic and obtainable for 4-5 hours at normal room temperature. Periodically you need to agitate the slurry sometimes as not to create surface film (skin).
Technical data
· Bagged PRODUCT
APPEARANCE: Whitish premixed MORTAR
Density: 1.5gr / ml
SOLID INGREDIENTS: 100%
TIME CONSERVATION - STORAGE: 12 months in original sealed containers and in a place suitable, low humidity.
DEGREE OF RISK: MINIMUM (CEE88 / 379)
RATE OF MIXING WATER: 24 to 26 wt%.
RETENTION TIME IN THE CONTAINER: ABOUT 5 HOURS
AVAILABLE TIME OF APPLICATION: 20 MINUTES (EN1346)
CORRECTION TIME: 20 MINUTES (DIN 18156-2)
RESISTANCE TO SLIPPING: <0.5 (EN 1308)
pulp pH: ~ 12
STEPPING FLOOR: AFTER 24 HOURS
ABILITY TO WALL JOINTING: after 3-6 hours
JOINTING ABILITY TO FLOOR: AFTER 24 hours
CONSUMPTION:
3-5 kg per square meter, or depending on the size of the plates and positioning thickness. Old mosaics raise this figure to 8-10 pounds since it needs leveling of interchanged corners (edges).